Terp! Sain itselleni hankittua minoltan hi-matic f -kameran ja törmäsin ongelmaan että kyseiseen senioriin ei enää oikein löydä paristoja. Jos nuo alkuperäiset paristot jostain löytyy, niin niillä kyllä hintaakin on aika mojovasti. Nettiä vähän aikaa selailtuani törmäsin kyseiseen keinoon rakentaa oma paristokelkka kameran koteloon: "All you want is a conductive spacer that makes up for the difference between the dimensions of the small SR44/A76 and the thicker PX640 cell. My adpater is made from the cap of a Crayola marker. The ridge on the cap is carefully cut off with a sharp utility knife or sanded down. The length of the cap is cut to the dimension needed to fit in the battery chamber of the camera. A small screw, of the type used on computer circuit boards and computer cases is snug fitted through a hole in the Crayola marker cap. The end of the screw should lightly touch a A76/SR44 cell snug fitted into the cap from the open end. You may need to experiment with different size screws to get it right." Mitäs luulette, mahtaako toimia?? onko jollain parempaa keinoa? ehdotuksia ja aatteita, kiitos!
Vs: Minolta Hi-matic F paristo-ongelma! Täältä saa sopivia paristoja: www.weincell.com Niitä saa myös ebayn kautta.