Tuollaisen löysin, ja tuntuu jopa toimivalta mutta valotuksen mittauksesta en saa mitään tolkkua, onko jollakin tietoa kuinka toimii. Niin ja on siinä ihan objektiivikin Scheider 1,9 50mm.
Vs: EDIXA PRISMAT TTL Olisko tästä apua: http://www.cameramanuals.org/pdf_files/edixa_prismat.pdf http://www.cameramanuals.org/pdf_files/edixa_ltl_booklet.pdf
Vs: EDIXA PRISMAT TTL Kiitos yrityksestä tuon ekan löysin itsekin se käsittelee eri kameraa eri kiinnityksellä, toinen linkki ei mulle aukea. terv.JN
Vs: EDIXA PRISMAT TTL Kokeile avata vielä. Siinä on ainakin: The Edixa LTL meter covers exactly the same angle of view as your lens does for the picture. The entire picture area is covered. The aperture is closed down during the metering process (Meter lever depressed) and opens for focusing. Of course the diaphragm is automatic and closes for the split-second when picture is taken. Focusing is always done through the fully open lens, showing a bright and well-illuminated finder image on the groundglass. The C.dS meter for light metering is effective within the range of film speeds from 6-1600 ASA (9-33 DIN). Shutter speeds range for metering from 1/1000 to 8 sec. A mono cell of 1.35 V (Mallory PX 13), known for its characteristics of constant power output and sudden drop-off at the end of it's long life, is used to power the meter. The meter is switched on only during the metering time and as long as the lever is activated. Lever = vipu (Haikein mielin taas huomaan tuossakin muistutuksen elohopeapariston ylivertaisuudesta.)
Vs: EDIXA PRISMAT TTL Kerran vielä pojat, himmenetyn aukon mittaus tuli/oli sevää sitämyöten ok juttu. mutta tuossa kakkoslinkin kuvassakin näkyvä säätöpyörä takaisinkelauskammen ympärillä, ei siis filminherkkyys vaan se jossa on kai suljinaikoja sen vaikutus /tarkoitus on edelleen hakusessa, siihen jos vielä löytyisi apuja niin kiitos jo etukäteen. terv.J.N